This is a jig to help make the holes at the right angle for a coat rack. Coat racks are a simple and fun project that is also useful.
 |
| This is the side view of a coat rack jig. This will give you the right angle for the pegs on a coat rack. |
src="https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjJMUkN3wBZaDt9818nAhspBdm0zpRlDO7AvYLcLF2ewtFw10X3wVbEWQRtQegkTh7IQnuZDicLLb-aQsxQCvQS7jjvqjNSq7kaZEmqkI46MtAtaV9PSVnfKn3rlAlTojukAi4JR0thI28i/s320/P8260204.JPG" width="320">This jig is 2" high on one side and tapers down. The top of the jig is 10" by 12". I used a thin piece of plywood for the top and two 3/4" by 10" pine strips 2" on one side and tapering down. I used glue and small nails to fasten the two sides to the top.
Eugenie Woodcraft
Beautiful furniture, made simple.
 |
| This is my son making the holes for the pegs for a coat rack on a drill press. |
Beautiful furniture, made simple.
0 comments:
Post a Comment